When choosing the right conveyor to manage metal scrap, maintenance and technology should heavily influence the decision—to increase the conveyor life and reduce maintenance issues. One of these maintenance issues is belt tension. From the time of installation, the belt stretches the longer it runs, creating slack and wear issues. Typically belts also must be visually checked for wear and […]
“We get $0.17 per pound more for our briquetted material over loose chips.”– Jack Rovan, Martin-Baker Plant Manufacturing ManagerProven Results Achieved for PRAB Customers: Documented reduction of scrap volume by as much as 90% Increased scrap value up to 25% Reclaimed up to 99% of cutting fluids “We have seen around […]
When considering adding a new or additional conveyor system to your metalworking operation, it’s essential to understand the critical factors involved in the research and selection process. Each type of metal scrap and shop process has unique requirements, making it crucial to prioritize the most vital aspects of a conveyor system tailored to your needs. Critical Goals for Conveyor […]
Download Conveyors Still Operating in the Field After 57 YearsImprove Casting Consistency and ProductivityPRAB Quench Conveyors are excellent for applications where air cooling is not sufficient or practical. Choose from a complete line of liquid-tight conveyors for die cast, heat transfer, parts cooling or coating operations. System Features: In-pit or above floor installation Liquid-tight tank 2.5” […]
Proven to Raise Productivity Up To 60% Documented Results Achieved by PRAB Customers Long Lasting Equipment: Conveyors Still Operating in the Field After 57 Years Scrap aluminum from die cast trim presses drop onto oscillating conveyors that feed onto dual under-floor centralized collection oscillators. Oscillating conveyor deposits scrap into a large 6” […]
Proven To Raise Productivity Up To 60% Documented Results Achieved by PRAB Customers Decreased Downtime Downtime Before PRAB: 3-4 hoursDowntime After PRAB: 2 minutes Safer Workplace “Our process of disposing metal scrap has become more ergonomic and safer.” – Jack Rovan, Martin-Baker Long Lasting Equipment: Conveyors Still Operating in the Field After 57 Years PRAB Conveyors […]
Proven to Raise Productivity Up To 60%Documented Results Achieved by PRAB Customers Enhanced Productivity Downtime Before PRAB: 3-4 hours Downtime After PRAB: 2 minutes Safer Workplace “Our process of disposing metal scrap has become more ergonomic and safer.” – Jack Rovan, Martin-Baker Long Lasting Equipment: Conveyors Still Operating in the Field […]
There isn’t an employer in existence that shouldn’t consider slips and falls to be a significant safety concern in its facilities. In an article about overlooked hazards and risk zones in the workplace, Facility Executive magazine cites some sobering numbers: Same-level slip and fall accidents are the leading cause of workplace injuries and totaled almost 200,000 in 2015, according to […]
(800) 968-7722
(800) 493-3462