PRAB > News & Knowledge >

Magnetic Conveyors

Reducing Conveyor Downtime

This white paper will address how: • Conveyor design reduces carryover • Pre-conditioning metal scrap improves material transfer • Build quality significantly impacts maintenance How to Increase Conveyor Utilization and Keep Metalworking Processes Moving By Mike Hook, Sales & Marketing Director, PRAB Introduction Conveyors are said to be the workhorses of production. The conveyors used to move metal […]

Maintenance and Technology Considerations When Selecting a Metal Scrap Conveyor

When choosing the right conveyor to manage metal scrap, maintenance and technology should heavily influence the decision—to increase the conveyor life and reduce maintenance issues. One of these maintenance issues is belt tension. From the time of installation, the belt stretches the longer it runs, creating slack and wear issues. Typically belts also must be visually checked for wear and […]

Blog: Considerations for Conveyor Selection

When looking into adding a new, or additional conveyor system to an operation it is imperative to know the major considerations when researching and selecting the right piece of equipment. Every type of metal scrap and shop process is unique, so it is important to prioritize the aspects of a conveyor system most vital to your needs. Conveyor Selection […]

Product Brochure: PRAB Magnetic Conveyors

Download     Conveyors Still Operating in the Field After 57 Years Quiet Performance with No Carryover PRAB’s Magnetic Chip Conveyors effectively transfer wet or dry ferrous chips, stamping slugs, turnings, or parts without carryover. Systems move material with the aid of permanent ceramic magnets located under a stainless-steel slider bed. An oil reservoir in the base of the conveyor […]

Product Brochure: Conveyor Solutions

Proven To Raise Productivity Up To 60%   Documented Results Achieved by PRAB Customers Decreased Downtime Downtime Before PRAB: 3-4 hoursDowntime After PRAB: 2 minutes Safer Workplace “Our process of disposing metal scrap has become more ergonomic and safer.” – Jack Rovan, Martin-Baker     Long Lasting Equipment: Conveyors Still Operating in the Field After 57 […]

Product Brochure: Stamping Scrap Conveyors & Systems

Proven to Raise Productivity Up To 60% Documented Results Achieved by PRAB Customers Enhanced Productivity Downtime Before PRAB: 3-4 hours Downtime After PRAB: 2 minutes Safer Workplace “Our process of disposing metal scrap has become more ergonomic and safer.” – Jack Rovan, Martin-Baker     Long Lasting Equipment: Conveyors Still Operating in the Field After […]

Blog: How PRAB Conveyors Can Keep Slips and Falls to a Minimum

There isn’t an employer in existence that shouldn’t consider slips and falls to be a significant safety concern in its facilities. In an article about overlooked hazards and risk zones in the workplace, Facility Executive magazine cites some sobering numbers: Same-level slip and fall accidents are the leading cause of workplace injuries and totaled almost 200,000 in 2015, according to […]