Drag Conveyors | Page 2 of 2 | PRAB
PRAB > News & Knowledge >

Drag Conveyors

Product Brochure: Conveyor Solutions

   Proven To Raise Productivity Up To 60%  Documented Results Achieved by PRAB Customers Decreased Downtime Downtime Before PRAB: 3-4 hoursDowntime After PRAB: 2 minutes Safer Workplace “Our process of disposing metal scrap has become more ergonomic and safer.” – Jack Rovan, Martin-Baker    Long Lasting Equipment: Conveyors Still Operating in the Field After 57 Years PRAB Conveyors […]

Product Brochure: Stamping Scrap Conveyors & Systems

Proven to Raise Productivity Up To 60%Documented Results Achieved by PRAB Customers Enhanced Productivity Downtime Before PRAB: 3-4 hours Downtime After PRAB: 2 minutes Safer Workplace “Our process of disposing metal scrap has become more ergonomic and safer.” – Jack Rovan, Martin-Baker     Long Lasting Equipment: Conveyors Still Operating in the Field […]

Blog: How PRAB Conveyors Can Keep Slips and Falls to a Minimum

There isn’t an employer in existence that shouldn’t consider slips and falls to be a significant safety concern in its facilities. In an article about overlooked hazards and risk zones in the workplace, Facility Executive magazine cites some sobering numbers: Same-level slip and fall accidents are the leading cause of workplace injuries and totaled almost 200,000 in 2015, according to […]

Blog: Stick a Fork in Your Forklift Problem with Engineered Conveying Systems

The forklift truck is a common piece of equipment for many industrial manufacturing operations that need to move enormous amounts (read: tons) of material from point A to point B, day in and day out. Most of these operations probably feel like they can’t live without forklifts. However, the convenience and expediency they provide in addition to sparing workers the […]

Blog: Automating the Chip Removal Process with PRAB Conveyors

“Keeping up with high Q rates” sounds like the title of a reality TV show. It’s definitely an important aspect of any industrial manufacturing operation that puts a priority on optimizing output. If the goal is to machine as many parts as possible in the shortest amount of time to maximize profitability, a high material removal rate (Q) is critical […]