Written by Paul Montgomery, Marketing Leader at PRAB. Reviewed by Mike Proos, Director of Engineering &Field Service. Published 6/XX/2026. Last updated 6/XX/2026. Q: What is centralized coolant management, and how does it improve OEE? A: Centralized coolant management is the practice of filtering, conditioning, and recycling metalworking coolant from one central system that serves every machine in a plant, […]
Written by Paul Montgomery, Marketing Leader, PRAB, Inc. Reviewed by Mike Proos, Director of Engineering/Field Service at PRAB Inc. | Published June 9, 2026 | Last updated June 10, 2026 Quick answer: Control odor and bacteria in recirculating coolant by addressing the conditions that feed microbial growth: keep the concentration within range, remove tramp oil and fines, keep the […]
Written by Paul Montgomery, Marketing Leader at PRAB. Reviewed by Mike Proos, Director of Engineering &Field Service. Published 6/9/2026. Last updated 6/9/2026. Q: What is a Profit and Compliance Platform for metalworking operations? A: A Profit and Compliance Platform is an integrated way to manage the three waste streams every metalworking plant produces- metal scrap, spent cutting fluids, and industrial wastewater- […]
PRAB’s Metal Chip Processing Selection Framework is a structured decision tool for metalworking operations selecting between wringers, briquetters, crushers, and centrifuges. The framework aligns three operational variables, scrap volume, metal type, and fluid content, with the equipment configurations that consistently deliver up to 90% scrap volume reduction, up to 98% coolant recovery, and up to 25% increase in scrap resale […]
Metal chip briquetters get a lot of attention, and for good reason. Compressing loose turnings into dense, dry briquettes increases the value of metal scrap, reduces hauling costs, and recovers cutting fluid that would otherwise be lost. Any shop generating significant volumes of aluminum, steel, copper, brass, or cast iron chips should be evaluating briquetting as part of its scrap […]
PRAB’s Guardian Coolant Recycling Systems recover up to 98% of spent metalworking coolant and return it clean to your machining operation. For high-volume manufacturing facilities, that coolant recovery rate reduces coolant purchases by 50-75% and cuts haul-away disposal costs by up to 90%, with a documented return on investment in as little as 6 to 18 months. So what does […]
In a volatile 2026 market — shaped by geopolitical shocks, tariff uncertainty, and rising energy costs – metalworking coolant management is no longer a maintenance task. It’s a strategic financial decision. Walk through most machine shops today, and you’ll hear the same refrain: budgets are tighter, lead times are longer, and every line item is under scrutiny. Coolant, however, […]
Brownfield manufacturing plants can modernize scrap handling without major disruption by upgrading existing systems in phases rather than replacing everything at once. For many facilities, aging conveyors, manual chip handling, forklift traffic, coolant loss, and inefficient scrap load-out processes create hidden costs every day. The most effective modernization strategy is one that improves productivity, safety, and recovery value while integrating […]
Aluminum chip recycling is one of the most effective ways manufacturers can recover value from machining operations. For companies machining aluminum, chips and turnings are not just waste—they are a reusable asset. Yet many facilities still lose profit by hauling wet chips, storing bulky swarf, paying excessive freight, or allowing reusable coolant to leave with the scrap. The best aluminum […]
Stop Leaving Money on the Table – How to Maximize Aluminum Scrap Value with PRAB’s Briquetting and Conveyor Systems Most metalworking operations think about aluminum scrap the same way they’ve always thought about it — as a byproduct to manage, not an asset to optimize. In previous years, that mindset was understandable. Today, with aluminum prices up more than 46% […]
(800) 968-7722
(800) 493-3462