Coolant Recycling

Published August 11, 2026. Last updated August 11, 2026. Quick answer: PRAB integrates coolant recycling, fluid filtration, wastewater treatment, and metal scrap conveying equipment with existing plant systems through a structured, phased framework, not a one-off install. The process begins with an application study and controls assessment, moves through a documented interoperability plan covering supported PLCs, robotic cells, and OEM […]

Written by Paul Montgomery, Marketing Leader, PRAB, Inc. Reviewed by Mike Proos, Director of Engineering/Field Service at PRAB Inc.  |   Published June 9, 2026  |   Last updated June 10, 2026   Quick answer: Control odor and bacteria in recirculating coolant by addressing the conditions that feed microbial growth: keep the concentration within range, remove tramp oil and fines, keep the […]

There’s a smell that anyone who has worked in a machine shop knows. It shows up on Monday mornings after the machines have been sitting idle all weekend. Dirty Coolant Costs, and it smells somewhere between rotten eggs and sour milk, and by mid-morning, you’ve stopped noticing it — which is part of the problem. That smell has a specific […]

The U.S. manufacturing sector is running into a wall it cannot drill through, outsource away, or ignore any longer: water scarcity. As of early 2026, more than half of the contiguous United States is experiencing some degree of drought, and in the most production-intensive industrial regions — Phoenix, Las Vegas, Corpus Christi, San Antonio, and California’s manufacturing corridors — the situation […]

A Practical Framework for Modernizing Metal  Scrap, Coolant Recycling, and Industrial Water Systems Manufacturers are under increasing pressure to improve performance without expanding footprint or headcount. Margins are tighter. Skilled labor is scarce. Disposal costs continue to rise. Water and fluid management are becoming strategic cost variables. And capital projects in engineering manufacturing, must demonstrate measurable return within defined timeframes. […]

Why Coolant Waste Costs More Than You Think Every CNC operation depends on cutting fluids to cool, lubricate, and flush chips away from tooling surfaces. Over time, these fluids become contaminated with tramp oils, metal fines, and bacteria—turning an essential asset into a costly waste stream. This is where PRAB’s Cutting Fluid Recovery systems optimize Coolant Recycling. Disposing of spent […]

Introduction: Coolant — the Hidden Cost Driver in Metalworking Coolant and cutting fluids are essential for precision machining, but they come with recurring costs. As these fluids degrade, manufacturers face increased tool wear, quality issues, disposal fees, and the expense of frequent fluid top-offs. Implementing coolant recycling can significantly mitigate these costs. Fortunately, modern integrated separation and filtration systems can […]