Oscillator Conveyors

Transfer hot, dry or wet abrasive metal scrap or finished parts across horizontal distances

osc screening sortingThis vibratory conveyor is the top choice for transferring hot, dry or wet abrasive metal scrap or finished parts across horizontal distances. The oscillator provides a steady movement of material at roughly 12.5 feet (3.81 metres) per minute.

Its durable, multi-ply fiberglass springs provide a smooth, quiet flow and discharge. Install your unit along side presses or in a pit beneath your presses. It's low cost per foot and low-cost operation make it an economical choice for any size shop.

Features / Options

Features

  • The low-maintenance eccentric single drive uses only four bearings
  • Lubrication points are centrally located for easy access and maintenance

Options

  • Trough designs are available in square or flared styles
  • Trough surfaces come in smooth, urethane, abrasion resistant or rigidized steel
  • Screening and sorting configuration available with side discharge chute

Specifications

Choose from three models to meet your specific application needs. See chart below for detailed information.

 

Light Duty

Standard Duty

Heavy Duty

Single drive
conveyor length

Max. 50'
(15 m)

Max. 80'
(24 m)

Max. 200'
(60 m)

Trough
thickness

10-7 gauge
(3.42-4.55 mm)

10-7 gauge
(3.42-4.55 mm)

7 gauge or 0.25
(4.55 mm or 0.64 cm)

Frame base
steel

Structural angle
and channel

Structural angle
and channel

I-beam

Stroke
movement

0.3125-0.5 in
(0.79-1.27 cm)

0.3125-0.5 in
(0.79-1.27 cm)

0.375-0.5 in 
(0.95-1.27 cm)

Conveyor
widths

8-16 in 
(20.32-40.64 cm)

8-60 in
(20.32-152.4 cm)

18-60 in 
(45.72-152.4 cm)

Drive section
location/length

End or center
84-120 in 
(213.36-304.8 cm)

End or center
84-120 in
(213.36-304.8 cm)

Center
120 in
(304.8 cm)

Spring spacing
down length

48-60 in
(121.92-152.4 cm)

48-60 in
(121.92-152.4 cm)

84 in
(213.36 cm)

Drive

Single arm eccentric

Single or double
arm eccentric

Double arm eccentric

Multi-ply fiberglass
reaction spring

0.2 in thickness
(.50 cm)

0.2 in thickness
(0.50 cm)

0.31 in thickness
(0.78 cm)

Bearings

Double tapered roller bearings

Operation frequency

400-600 RPM