Steel Belt Conveyor
More versatile than other types of conveyors, the steel belt conveyor can be used to handle any type of metal scrap from bushy material to chips and turnings, wet or dry, in any volume and in a wide variety of conveyor paths.
This vibratory conveyor is the top choice for transferring hot, dry or wet abrasive metal scrap or finished parts across horizontal distances. The oscillator provides a steady movement of material at roughly 12.5 ft (3.81 m) per minute.
Pivot Belt Conveyor
PRAB's pivot belt conveyor with Rigidized™ belt surface prevents scrap from sticking to the belt, and the exclusive-design pivoting hinges flip scrap into your hopper.
Stamping Scrap Conveyor
This fully automated conveyor with its positive discharge gives you a cleaner operation. Its leak-proof construction retains 100% of your cutting fluids as it transfers scrap to its destination.
Positively transfer wet or dry ferrous chips, stamping slugs, turnings or parts without carryover. Permanent ceramic magnets are located under the stainless steel slider bed which moves the material.
This workhorse transfers all types of metal chips, fines and turnings, wet or dry bushy wads and tramp metal solids with time and energy saving efficiency. Its liquid-tight trough construction is ideal for high-volume coolant flow applications.
Every part of this rugged unit is designed for severe duty so you can convey and elevate your most difficult, most abrasive wet or dry materials.
This versatile conveyor is well suited for distribution or elevating applications. It's easy to operate and maintain. Each screw conveyor is custom engineered to meet the needs of the application.
A transversing, bidirectional steel belt conveyor is designed for final load-out of stamping scrap into large trailers or railcars.
The pneumatic conveyor systems offer operation and installation flexibility. Systems are designed to pick up directly from CNC machining centers and transfer wet or dry material to a central chip processing systems or load out containers.
Choose from a complete line of liquid-tight conveyors for your die cast, heat transfer, parts cooling or coating operation. Quench conveyors are excellent for applications where air cooling is not sufficient or practical.
With PRAB casting coolers you can eliminate the misting and air quality issues associated with water quench conveyors. Extended lengths are available with single and/or multiple fan designs. The coolers run continuously or indexing.
Meter feeds abrasive die casting metal scrap directly to your melting furnace. Feeds reverbs and "through-the-wall" designs. Standard design incorporates oscillating steel trough plus heat shields and stainless steel discharge chutes extended into melt area. May be batch loaded or used as final component of a complete scrap-to-remelt system.
Tubular Drag Conveyors
PRAB's tubular drag conveyors employ a simple chain and flight design to move wet metal chips from the production floor to a chip processing or load-out area.
- Chip & Fluid Management
- Coolant Recycling
- Coolant Filtration
- Waste Water Treatment
- Case Studies
- Find a representative
- Product Literature
- About Us
- Material Test
- Request a quote
- Contact : Europe
- Test drive : Europe
- Request a quote : Europe