PRAB engineers and builds equipment solutions for the metalworking industry to increase scrap value and recover valuable fluids. Manufacturers use our equipment to move their scrap then shred/crush it to reduce its volume. The equipment(system) separates metal from fluid and collects the chips for storage or recycling (returning to your scrap dealer). The recovered fluids are then filtered for reuse or disposal.

Each customer receives individual attention to help them increase productivity, get more value from their metal scrap, use less floor space for moving and storing, and create a cleaner, safer working environment.
90%

Reduction in Metal Scrap Volume

Using a chip processing system

$212,000

Annual Oil Savings

Using a crusher/wring system

25%

Increase in Scrap Value

Using a Dualpak™ Briquetter

18 Months

Payback

Using a Dualpak™ Briquetter

Each solution is custom-built to your process and requirements.

We can only guarantee results like this because of our experience and extensive testing capabilities. Our lab is equipped with the actual equipment we recommend. Watch your material run in person or remotely. When you’re ready to get started, contact us or request a material test.

Chip Systems

Complete metal scrap size reduction and fluid separation system for any volume of turnings and flowable chips. Components and layout are engineered to application and requirements.

  • Automated chip processing for increased safety and reduced labor costs
  • Reclaims up to 99% of fluids
  • Reduces metal scrap volume by as much as 90%
  • Decreased storage and transportation costs
Components
  • Wringers/Centrifuges
  • Vertical Axis Crushers
  • Metal Turning Shredders
  • Tramp Metal Separators
  • Carts & Dumpers
  • Bundle Breaker
  • Metal Scrap Conveyors

Typical Configurations

Uses a crusher to reduce large bundles and stringy turnings before separating fluid using a wringer.

Learn More >

Uses a shredder to manage flowable chips and loose turnings before separating fluid using a wringer.

Learn More >

Compact, skid-mounted scrap metal system. Self-contained and turn-key. Ideal for lower volumes.

Learn More >

Complete engineering and fabrication to your spec. Meeting some of the toughest industry requirements including large, high-volume, modular turn-key systems.

Learn More >

Complete metal scrap size reduction and fluid separation systems for any volume of turnings and flowable chips.Components and layout are engineered to application and requirements.

 

Common Configurations
Components
  • Wringers/Centrifuges
  • Vertical Axis Crushers
  • Metal Turning Shredders
  • Tramp Metal Separators
  • Carts & Dumpers
  • Bundle Breaker
  • Metal Scrap Conveyors

Chip System Components

Heavy-duty scrap volume reduction. Crushes metal turnings and bulky wads into chips. Reduces scrap volume up to 90%.

Learn More >

Spins metal chips with over 600G's of centrifugal force, separating out fluid for recovery. Dry chips can be discharged pneumatically or mechanically conveyed.

Learn More >

Shreds metal turning into flowable chips. Uses stainless steel cutter discs that shear, rip and tear to reduce scrap volume.

Learn More >

Stand-alone Chip Processing

Processes low volumes of stringy and bulky metal turnings. Typically mounted on a stand or heavy-duty cart which fits on the discharge conveyor of a machining center.

Learn More >