Metal Scrap Processing Equipment moves and modifies stringy metal scrap to valuable, dry chips or convenient, compact briquettes. Our systems typically use a crusher or shredder to transform tangled metal scrap into flowable chips, which is then conveyed to a wringer or briquetter. The metal scrap is then separated from liquid, producing reduced, dry metal. The spent fluid is collected for disposal or reuse using our wastewater equipment or fluid recycling equipment.
We can only guarantee results like this because of our experience and extensive testing capabilities. Our lab is equipped with the actual equipment we recommend. Watch your material run in person or remotely. When you’re ready to get started, contact us or request a material test.
Complete metal scrap size reduction and fluid separation system for any volume of turnings and flowable chips. Components and layout are engineered to application and requirements.
Uses a crusher to reduce large bundles and stringy turnings before separating fluid using a wringer.
Learn More >Uses a shredder to manage flowable chips and loose turnings before separating fluid using a wringer.
Learn More >Compact, skid-mounted scrap metal system. Self-contained and turn-key. Ideal for lower volumes.
Learn More >Complete engineering and fabrication to your spec. Meeting some of the toughest industry requirements including large, high-volume, modular turn-key systems.
Learn More >Uses two opposing hydraulic cylinders to press chips, loose turnings and swarf into near solid, dry briquettes. Components and layout are engineered to application and requirements.
Heavy-duty scrap volume reduction. Crushes metal turnings and bulky wads into chips. Reduces scrap volume up to 90%.
Learn More >Spins metal chips with over 600G's of centrifugal force, separating out fluid for recovery. Dry chips can be discharged pneumatically or mechanically conveyed.
Learn More >Shreds metal turning into flowable chips. Uses stainless steel cutter discs that shear, rip and tear to reduce scrap volume.
Learn More >Remove bar-ends, broken tooling and other solids from chip flow to protect other metal scrap equipment. Available in 6 unique models.
Learn More >Move wet or dry metal chips and turnings safely and easily with heavy-duty industrial carts and automatic dumpers. Integrated before or after chip processing.
Learn More >Heavy-duty conveyors move metal scrap and spent fluids quickly and automatically from point of production and through the entire scrap separation process.
Learn More >Uses two opposing hydraulic cylinders to press chips, loose turnings and swarf into near solid, dry briquettes. Briquetters can act as a stand alone unit when no long turnings are involved.
Learn More >Installs in a conveyor’s in-feed hopper, where dual rotating cylinders agitate the material, tearing stringy wads of chips, turnings, and bundles apart.
Learn More >Processes low volumes of stringy and bulky metal turnings. Typically mounted on a stand or heavy-duty cart which fits on the discharge conveyor of a machining center.
Learn More >Separate liquid from filter cake and swarf for optimal coolant recovery and savings on material disposal costs. Can be used as a stand-alone unit or in combination with the Dualpak™ Briquetter
Learn More >Processes low volumes of stringy and bulky metal turnings. Typically mounted on a stand or heavy-duty cart which fits on the discharge conveyor of a machining center.
Learn More >