|
|
PRAB Stamping Scrap Removal Case Studies
Application: Stainless and Conventional Steel Stamping Removal
Two identical scrap handling systems were installed in this application. Each consisted of oscillating vibratory scrap conveyors below the primary stamping presses. These conveyor lines discharge into flat-bottom Scrapveyor II™ elevating conveyors feeding swivel chutes that loads large roll-off containers. Both stainless steel and cold rolled steel were kept 100% segregated. The price differential between the metals was significant and helped cost-justify the system
Designed To Handle: Both stainless steel and conventional cold rolled steel in skeletal trim, slugs and many odd shapes up to .125 in. (3.2 mm) thick.
Dual System Includes:
• Six foot deep pit under presses with safety grating
• 80 foot of dual oscillating conveyors
• Dual 30 x 30 in. flat bottom, Scrapveyor II conveyors
• Dual powered swivel chute systems with sensors
• Controls
Proven Benefits:
• No carryover of material
• Improved housekeeping
• Dependable 24/7 scrap removal
• Limited maintenance required
• Complete separation of types of steel for optimum scrap recycling dollar
Stamping Scrap Systems Brochure
|
|
Dual Stamping Scrap Removal System
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
|
|
 |
 |
 |
 |
|
 |
 |
|
|
|
 |
 |
|
|
|
Click on any photo above for sample PRAB application solution
|
